Topcon Euro 160T

Overview

The Topcon Euro 160T draws 3.5 watts of power and provides all of Topcon's exclusive and advanced GPS+ features, including Full-speed USB device port (12 Mbps), Full-duplex 10BASE-T Ethernet port, support for 4 high speed RS232 serial ports.

Based on the Eurocard standard format, this power-packed board provides tracking of 20 satellites in dual frequency mode  GPS and GLONASS and can be instantly transformed via simple software commands into:

• GD mode (L1 + L2 GPS)
• GG mode (L1 GPS & GLONASS)
• GGD mode (L1 + L2 GPS & GLONASS)

Euro 160T Features

Tracking Features

• 20 satellites, all-in-view, L1 GPS, L1/L2 GPS, L1/L2 GLONASS, L1/L2 GPS + L1/L2 GLONASS, WAAS/MSAS/EGNOS.
• Cinderella Option.
• Up to 30 dB of "IN-BAND" interference suppression.
• Co-Op Tracking (high satellites help low satellites)
• Low signal tracking (down to 30 dBHz)
• Fast acquisition and fast re-acquisition
• Cold start < 60 sec
• Warm start < 35 sec
• Reacquisition < 1 sec
• Up to 30 g's of dynamic
• Advanced Multipath Mitigation

Data Features

• Up to 20 Hz update rate for real time position and raw data (code and carrier)
• 10 cm code phase and 0.1 mm carrier phase precision
• RTCM SC104 versions 2.1, 2.2 and 3.0 Input/Output
• NMEA 0183 versions 2.1, 2.2, 2.3 and 3.0 Output
• Multiple Base RTCM
• Geoid and Magnetic Variation models
• RAIM
• Different DATUMs support
• Output of grid coordinates
• CMR and CMR+ support

Survey Accuracy

Dual Frequency:

• Static, Fast Static
  Horizontal: 3mm + 1ppm x (baseline length)
  Vertical: 5mm + 1ppm x (baseline length)
• Kinematic, RTK
  Horizontal: 10mm + 1.5ppm x (baseline length)
  Vertical: 20mm + 1.5ppm x (baseline length)

Data Storage

• Up to 1 GB of on-board data storage (removable CompactFlash card).

Input/Output

• Four high speed RS232 serial ports (up to 460.8 Kbps).
• Full-duplex 10BASE-T Ethernet port.
• Full-speed USB device port (12 Mbps).
• Direct connection to our GPS-coupled spread spectrum radio.
• External Reference Frequency input/output
• Two 1PPS outputs (LVTTL) synchronized to GPS, UTC, or GLONASS
• Two Event Marker inputs
• MINTER interface:
  Four external LED drivers
  ON/OFF control input External command input
• Four General Purpose 3.3V CMOS inputs
• Eight General Purpose 3.3V CMOS outputs

Power

• Input supply voltage: 4.75V to 28V
• Power consumption: 3.5W typical; 4.0W max
• On-board back-up battery for timekeeping and almanac data storage: 10 years of operation min

Environmental

• Operating Temperature -40°C to +75°C
• Storage Temperature -40°C to +75°C

Product: Topcon Euro 160T
Manufacturer: TOPCON Positioning Systems
Category: OEM Boards