GPS Source’s RMS132 is a rack-mount GPS radio frequency splitter with 1 input and 32 outputs. It works by receiving input from a GPS simulator or GPS antenna on the roof and splitting the signal to 32 GPS receivers or timing boards. Thus, it can be considered to be an indoor distribution network for GPS signals.
Standard configuration is with 110VAC input. As an option, 230 VAC can be provided. Direct current regulated output voltage is directed to the input port of the antenna. The power is used to operate an active GPS antenna which is attached to that port.
Rack mounts like this one are used especially by timing, test, and cellular labs that employ GPS.
The RMS132 has more options than comparable products on the market. Therefore, it can be custom tailored to customer needs.
- Certified to military standard
- Many options available
- Streamlined size optional
- Comparable to standard 19-inch racks
- Transmits Galileo, GLONASS, GPS L1 and L2
|Frequency range:||1.2 to 1.6 GHz|
|In/out impedance:||50 Ohms|
|Gain flatness:||3 dB|
|Noise figure:||3 dB|
|Amp. balance:||0.5 dB|
|Phase balance:||1.0 degree|
|Group delay flatness:||1 ns|
|Maximum RF input:||0 dBm|
|Operating temperature:||-40 degrees Celsius to +85 degrees Celsius|
|Size:||19 x 8 x 5.5 or 3.5 inches|
The RMS132 from GPS Source is available through TerrisGPS. If you have any question about this splitter, please do not hesitate to contact us using the Request Pricing form.