Email Us: [javascript protected email address] Toll Free: 1-866-642-1880
BD992-INS GNSS Receiver Board

Trimble BD992-INS GNSS Receiver Board

MANUFACTURER: Trimble
CATEGORIES: L1/L2/L5/GLONASS + Heading GNSS Receivers Embedded, Trimble

The BD992-INS GNSS module from Trimble produces robust, high accuracy positions and orientations in all environments by using its integrated inertial sensors. If you need continuous centimeter accuracy in a compact package, the Trimble BD992-INS will do the job for you.

REQUEST PRICING

Product Description

Overview

Delivering the most reliable and quickest RTK initializations for centimeter positioning, the Trimble BD992-INS supports triple frequency for numerous constellations, including GLONASS, GPS, Galileo and BeiDou. The unit also caters for receiving additional signals as new satellites are added to the constellations.

If centimeter accuracy is not needed, the integrated GNSS-Inertial engine delivers high accuracy DGNSS and GNSS positions. This is even possible in challenging environments, including urban canyons.

No base station is required to achieve different levels of performance, even up to centimeter level. This is achieved through the use of RTX or OmniSTAR services.

The Trimble Maxwell 7 Technology provides Advanced RF Spectrum Monitoring and Analysis, 2 x 336 Tracking Channels, proven low ‑elevation tracking technology, as well as Trimble Everest Plus multipath mitigation.

Features

  • Dual antennas ensure rapid heading alignment data
  • Lever arm calculations can be done from the point of interest to the antenna
  • Continuous positioning is available, even in GNSS denied environments

Technical Specifications

Position Antenna
GPS: L1 C/A, L2E, L2C, L5
BeiDou: B1, B2, B3
GLONASS: L1 C/A, L2 C/A, L3 CDMA
Galileo: E1, E5A, E5B, E5AltBOC, E6
IRNSS: L5
QZSS: L1 C/A, L1 SAIF,L1C, L2C, L5, LEX
SBAS: L1 C/A, L5
MSS L-Band: OmniSTAR, Trimble RTX
Vector Antenna
GPS: L1 C/A, L2E, L2C, L5
BeiDou: B1, B2, B3
GLONASS: L1 C/A, L2 C/A, L3 CDMA
Galileo: E1, E5A, E5B, E5AltBOC, E6
IRNSS: L5
QZSS: L1 C/A, L1 SAIF,L1C, L2C, L5, LEX
Physical
Input voltage: 3.3 VDC +5% / -3%
Power consumption: Typical 1.5 W (L1/L2 GPS + L1/L2 GLONASS)
Size: 100 mm x 60 mm x 11.6 mm
Weight: 60 grams
Environmental
Operating temperature: -40 °C to +75 °C
Storage temperature: -55 °C to 85 °C
Vibration: MIL810F, tailored
Random 6.2 gRMS operating
Random 8 gRMS survival

Ordering

The BD992-INS GNSS receiver board from Trimble is available through TerrisGPS. If you would like more information about this product, please feel free to get in touch with us by completing the Request Pricing form.

Reviews

There are no reviews yet.

Be the first to review “Trimble BD992-INS GNSS Receiver Board”

testimonial icon

Client Testimonials

"Thanks for all the troubleshooting help, also to John for his assistance and the prompt answers from you guys!"

F.A. - Survey Industry

"Thank you for your prompt service. All seems to be working well again. Your techs were very helpful with the troubleshooting."

J.O. - Ground Navigation

testimonial icon

Copyright , TERRISGPS, All rights reserved, Privacy Policy, Terms