Overview
The Harxon TS112 SE GNSS smart antenna integrates a Harxon X-Survey multifunctional GNSS antenna with a high precision GNSS module in a single rugged housing. Used either for standalone positioning or dual-frequency precise point positioning (PPP), the TS112 SE provides positioning accuracy from sub-meter to centimeter level while using the SAPCORDA Safe and Precise Augmentation (SAPA) service for various applications, so there is no need for costly hardware replacement.
Harxon’s TS112 SE GNSS smart antenna receives dual-frequency multiple constellation signals from GPS, GLONASS, Galileo, BeiDou and SBAS as well as L-Band signals via the SAPA augmentation service. The SAPA precise augmentation service provides an alternative economical positioning option and wide service coverage in environments that have poor LTE network coverage. Comprehensive GNSS support and the flexible L-band augmentation service ensure solid satellite tracking without signal outage, even on rugged terrain or in harsh conditions.
The TS112 SE features the patented SLIDE™ technology from Harxon to provide smooth positioning and exceptional linear accuracy, ensuring steady and consistent positioning output even through poor satellite availability or short periods of satellite signal reception interruption. By offering accurate positioning, the TS112 SE smart antenna is able to provide a reliable solution for agricultural machine automation.
The TS112 SE also features the Harxon terrain compensation algorithm that is capable of correcting deviations that are caused by vehicle’s pitch and roll while working on uneven ground or slopes. It helps users increase operation efficiency and reduce costs in the field.
The TS112 SE is equipped with two NMEA0183 compatible RS-232 serial ports and one NMEA2000 compatible CAN port. It also offers Bluetooth wireless technology for easy configuration on tablets or other devices that are commonly used for guidance and positioning applications.
The TS112 SE smart antenna adopts a compact and flat structure design. Its IP67 rating housing ensures reliable performance even when exposed to dust, rain, splash or sunlight. Two installation options are available for various off-road vehicles in agriculture and construction. One option uses built-in magnets at the bottom of the antenna. The other uses fixed mounting with M4 screws.
Features
- Scalable Positioning Accuracy from Sub-meter to Centimeter Available
- Comprehensive GNSS Support
- Wireless Bluetooth Technology for Easy Connectivity
- Patented SLIDE™ Technology Delivers Smooth Linear Positioning
- Terrain Compensation Algorithm Maximums Positioning Accuracy
- Rugged Housing, Flexible Installation Options, IP67 Rating Waterproof
Technical Specifications
Signals Received | |
GPS: | L1/L2 |
GLONASS: | L1/L2 |
Galileo: | E1/E5b |
BeiDou: | B1/B2 |
SBAS: | L1 |
QZSS: | L1C/A/L1S/L2C |
L-Band: | Yes |
Horizontal Position Accuracy | |
Single Point: | 1.5 m CEP (Single point) |
DGPS: | 0.4 m CEP |
SBAS: | 0.6 m CEP |
SAPA (Basic): | Below 1m to 10cm CEP |
SAPA (Premium): | Below 10cm CEP |
Performance | |
Data Rate: | 10Hz(max) |
Cold Start: | <50s |
Warm Start: | <35s |
Hot Start: | <10s |
Reacquisition: | <1s |
Velocity Accuracy: | 0.05m/s RMS |
Roll/Pitch Accuracy: | <1° RMS |
Time Accuracy: | 30ns RMS |
Physical | |
Dimensions: | 210 mm x 155 mm x 80 mm |
Weight: | < 600 g |
Connector: | 14pin Tyco Ampseal |
Mounting: | M4 Screw x 4 Integrated Magnetic Mount x 3 |
Electrical | |
Input Voltage Range: | +9VDC to +36VDC Minimum voltage when voltage drops: 6 VDC |
Power Consumption: | 2.5W(Typical) <10W |
Status LEDs: | Power RTK status Correction data link |
Environmental | |
Operating Temperature: | -40°C to +70°C |
Storage Temperature: | -40°C to +85°C |
Humidity: | 95% non-condensing |
Vibration: | GJB150.16-2009, MIL-STD-810 |
Compliance: | CE, FCC, REACH, RoHS |
Waterproof Protection Rating: | IP67 |
Ordering
The TS112 SE GNSS smart antenna from Harxon is available through TerrisGPS. Please use the Request Pricing form to contact us for further information.