DATASHEET:
Overview
The GPS Source S12S slimline GPS splitter has one input port and two output ports. It is commonly used to split GPS, Galileo as well as GLONASS signals from a single roof antenna and sends the outputs to two receivers.
Users can configure the S12S splitter to power the antenna by passing DC current from one RF output port to the antenna. The other RF output port would be configured to have a 200 Ohm DC load and simulate a DC current draw by the antenna.
The splitter provides excellent gain flatness of less than 2 dB. It can be enclosed in an optional sealed and waterproof housing for outdoor use. In addition, a military grade spike & surge protection option is available to protect the internal circuits of the splitter.
Features
- Available in two versions: amplified and passive
- Support GPS, Galileo, and GLONASS signals
- Excellent gain flatness
- Military grade spike and surge option (1275B) to protect internet circuits
- Sealed and waterproof option
Technical Specifications
| Frequency range: | 1 GHz – 2 GHz |
| In/out impedance: | 50 Ohms |
| Input/output SWR: | 2.0:1 |
| Gain flatness: | 2 dB |
| Noise figure: | 1.8 dB |
| Amp. balance: | 0.5 dB |
| Phase balance: | 1.0 degree |
| Group delay flatness: | 1 ns |
| Maximum RF input: | 0 dBm amplified, 30 dBm passive |
| Operating temperature: | -40 Celsius to +85 Celsius |
Ordering
The S12S slimline splitter from GPS Source can be ordered through TerrisGPS. Please feel free to send us your inquiries by filling out the Request Pricing form.
