DATASHEET:
Overview
The Trimble BD9250 GNSS receiver board is a lightweight, dual-frequency receiver board designed in an industry standard form factor to deliver centimeter accuracy for a variety of applications. It offers integrators the ability to switch between L2 and L5 signal tracking in the field, providing the user the ability to pick the best frequency for operations and allow for a maximum number of observations.
The Trimble BD9250 supports dual-frequency for the GPS, GLONASS, BeiDou, Galileo and QZSS constellations. As the number of satellites in the constellation grows the BD9250s is ready to take advantage of the additional signals to allow for quicker and more reliable RTK initializations for centimeter positioning. With the latest Trimble Maxwell™ 7 Technology, the BD9250s provides:
- Trimble ProPoint RTK/RTX Engine
- 336 Tracking Channels
- Trimble Everest Plus multipath mitigation
- Advanced RF Spectrum Monitoring and Analysis
- Proven low-elevation tracking technology
- Anti-spoofing protection
The Trimble BD9250 is designed for easy integration and rugged dependability. Customers benefit from the Ethernet
connectivity available on board, allowing high speed data transfer and configuration via standard web browsers. USB, CAN and RS-232 are also supported. Just like other Trimble embedded technologies, easy to use software commands simplify integration and reduce development time.
Different configurations of the model are available. These include everything from an autonomous L1 unit all the way to a multi-constellation dual-frequency RTK unit. All features are password upgradeable, allowing functionality to be upgraded as your requirements change.
Features
- Trimble MaxwellTM 7 Technology
- 336 Channels for multi-constellation GNSS support
- Trimble RTX Support
- L1 + L2 or L5 (Field selectable)
- Compact, lightweight design with industry standard pinouts
- Centimeter-level position accuracy
- Advanced RF Spectrum Monitoring
Technical Specifications
| Signal Tracking | |
| Tracking Channels: | 336 |
| GPS: | L1 C/A, L1C L2E, L2C, L5 |
| BeiDou: | B1, B2 |
| GLONASS: | L1 C/A, L2 C/A, L3 CDMA13 |
| Galileo: | E1, E5A, E5B, E5AItBOC |
| NavIC: | L5 |
| QZSS: | L1 C/A, L1C, L1 SAIF, L2C, L5 |
| SBAS: | L1 C/A, L5 |
| Trimble RTX: | MSS-Band |
| Positioning | |
| Autonomous: | 1.00 m (H) 1.50 m (V) |
| SBAS: | 0.50 m (H) 0.85 m (V) |
| DGNSS: | 0.25 m (H) 0.50 m (V) |
| RTK: | 0.008 m (H) 0.015 m (V) |
| CenterPoint® RTX | |
| Horizontal/Vertical (RMS): | 2 cm / 5 cm |
| Initialization Standard/Fast: | <15 min / <1 min |
| Performance | |
| Cold Start: | <55 seconds |
| Warm Start: | <30 seconds |
| Signal Re-acquisition: | <2 seconds |
| Horizontal Velocity Accuracy: | 0.007 m/sec |
| Vertical Velocity Accuracy: | 0.020 m/sec |
| Maximum Acceleration GNSS Tracking: | +/- 11g |
| Maximum Velocity: | 515 m/sec |
| Maximum Altitude: | 18,000 m |
| RTK Initialization Time: | Typically <8 sec |
| RTK Initialization Reliability: | >99.9% |
| Position Latency: | <20ms |
| Maximum Position/Attitude Update Rate: | 20Hz |
| Physical & Electrical | |
| Size: | 71.1 mm x 45.7 mm x 11 mm |
| Power: | 3.3 VDC +/- 5%, Typical 1.4 W (L1/L2 GPS + L1/L2 GLONASS) |
| Input Voltage: | 5 VDC Nominal |
| Maximum Current: | 125 mA |
| Minimum required LNA Gain: | 22.0 dB |
| Environmental | |
| Operating Temperature: | -40 °C to +75 °C |
| Storage Temperature: | -55 °C to +85 °C |
| Vibration: | MIL-STD-810G (tailored), Random 6.2 gRMS operating, Random 8gRMS survival |
| Mechanical Shock: | MIL-STD-810D, +/- 40g 10ms operating, +/- 75g 6ms survival |
| Operating Humidity: | 5% to 95% R.H. non-condensing, at +60 °C |
Ordering
The BD9250 GNSS receiver board from Trimble is available through TerrisGPS. If you would like more information about this product, please feel free to get in touch with us by completing the Request Pricing form.
- Module part number: 229250-XX
