DATASHEET:
Overview
The Trimble BD9250s GNSS receiver board is a lightweight, dual-frequency receiver designed in an industry standard form factor to deliver centimeter accuracy for a variety of applications. It offers integrators the ability to switch between L2 and L5 signal tracking in the field, providing the user the ability to pick the best frequency for operations and allow for a maximum number of observations.
The Trimble BD9250s supports dual-frequency for the GPS, GLONASS, BeiDou, Galileo QZSS and NavIC constellations. As the number of satellites in the constellation grows the BD9250s is ready to take advantage of the additional signals. This delivers the quickest and most reliable RTK initializations for centimeter positioning. With the latest Trimble Maxwell™ 7 Technology, the BD9250s provides:
- Trimble ProPoint RTK/RTX engine
- 336 tracking channels
- Trimble Everest Plus multipath mitigation
- Advanced RF spectrum monitoring and analysis
- Proven low-elevation tracking technology
- Anti-spoofing protection
The Trimble BD9250s was designed for easy integration and rugged dependability. Customers benefit from the Ethernet connectivity available on board, allowing high speed data transfer and configuration via standard web browsers. USB, CAN and RS-232 are also supported. Just like other Trimble embedded technologies, easy to use software commands simplify integration and reduce development times.
Different configurations of the model are available. These include everything from an autonomous L1 unit all the way to a
multi-constellation dual-frequency RTK unit. All features are password upgradeable, allowing functionality to be upgraded as your
requirements change.
Features
- Trimble Maxwell 7 technology
- Trimble ProPoint GNSS positioning engine
- Trimble RTX support over IP
- 336 channels for multi-constellation GNSS support
- S-Band
- L1 + L2 or L5 (field selectable)
- Compact, lightweight design with industry standard pinouts
- Centimeter-level position accuracy
- Advanced RF spectrum monitoring
Technical Specifications
| Signal Tracking | |
| Tracking Channels: | 336 |
| GPS: | L1 C/A, L1C L2E, L2C, L5 |
| BeiDou: | B1, B2 |
| GLONASS: | L1 C/A, L2 C/A, L3 CDMA |
| Galileo: | E1, E5A, E5B, E5AItBOC |
| NavIC: | L5, S-Band |
| QZSS: | L1 C/A, L1C, L1 SAIF, L2C, L5 |
| SBAS: | L1 C/A, L5 |
| Trimble RTX: | MSS-Band |
| Positioning | |
| Autonomous: | 1.00 m (H) 1.50 m (V) |
| SBAS: | 0.50 m (H) 0.85 m (V) |
| DGNSS: | 0.25 m (H) 0.50 m (V) |
| RTK: | 0.008 m (H) 0.015 m (V) |
| CenterPoint® RTX | |
| Horizontal/Vertical (RMS): | 2 cm / 5 cm |
| Initialization Standard/Fast: | <15 min / <1 min |
| Performance | |
| Cold Start: | <55 seconds |
| Warm Start: | <30 seconds |
| Signal Re-acquisition: | <2 seconds |
| Horizontal Velocity Accuracy: | 0.007 m/sec |
| Vertical Velocity Accuracy: | 0.020 m/sec |
| Maximum Acceleration GNSS Tracking: | +/- 11g |
| Maximum Velocity: | 515 m/sec |
| Maximum Altitude: | 18,000 m |
| RTK Initialization Time: | Typically <8 sec |
| RTK Initialization Reliability: | >99.9% |
| Position Latency: | <20ms |
| Maximum Position/Attitude Update Rate: | 20Hz |
| Physical & Electrical | |
| Size: | 71.1 mm x 45.7 mm x 11 mm |
| Weight: | 25 g |
| Power: | 3.3 VDC +/- 5%, Typical 1.4 W (L1/L2 GPS + L1/L2 GLONASS) |
| Input Voltage: | 5 VDC Nominal |
| Maximum Current: | 125 mA |
| Minimum required LNA Gain: | 32.0 dB |
| Environmental | |
| Operating Temperature: | -40 °C to +75 °C |
| Storage Temperature: | -55 °C to +85 °C |
| Vibration: | MIL-STD-810G (tailored), Random 6.2 gRMS operating, Random 8gRMS survival |
| Mechanical Shock: | MIL-STD-810D, +/- 40g 10ms operating, +/- 75g 6ms survival |
| Operating Humidity: | 5% to 95% R.H. non-condensing, at +60 °C |
Warranty
Trimble offers a warranty of 1 year warranty on all of it’s products, unless otherwise specified. The warranty ensures that the products are substantially free from defects in materials and workmanship and conform to Trimble’s publicly available specifications for a period on 12 months after the date of purchase. The warranty is covered in more detail in Trimble’s Legal Notices document.
Why Buy from Us?
In business since 2004, Canal Geomatics is an authorized Trimble dealer and has established itself as an industry-leading distributor of high-precision positioning products in North America. Our mission is to find the best solution for each unique application and extend premium support to ensure the long-term success of our customers. We offer both volume and reseller discounts for the majority of our product lines.
Ordering
The BD9250s GNSS receiver board from Trimble is available through TerrisGPS. If you would like more information about this product, please feel free to get in touch with us by completing the Request Pricing form.
- Module part number: 229251-XX
